Search results for: 'trainer 12 covers 14 x 94'

2 x 2 inches Heater Tailpiece with Gasket

2 x 3/4 inch 4 Barb SxS Manifold

The 3/8 x 1/4 inch Threaded Barb. This threads into the pump for the constant water feed to your spa pump. Only used on some model pumps.

Call us to verify that this is the right part for your pump.

The Ultralift with Undermount (SKU: 6132032) is a hassle-free cover lifter with an under-mount bracket that easily slides underneath your hot tub. One person can easily lift the hot tub cover on and off from outside or inside of your tub!

The Sensor, 24” x ¼” F/560 M7 is a high limit temp replacement sensor for the MAS560 sensor found in most Down East and Legend Series Master Spas.

Don’t let a broken sensor prevent you from your enjoying your spa when you want to.

The 1.5 x 2 inch Pump Adapter tailpiece is a pump assembly part commonly used to create a tight seal between pump parts along with the O-ring.

Make sure to buy all the parts you need for complete assembly of your replacement pump.

2 inc h S x 3/4inch, 4 Barb Ended Manifold

The Ultralift Visionlift Boomerang cover lifter (SKU: 6132034) gives you the freedom to open your cover all the way to the ground. With this cover lifter and sliding bracket, you will not have to drill a second location on your spa cabinet for your lifter.

This is the replacement right aluminum bracket or your CoverMate Cover Lifter by Leisure Concepts.

*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.*

2 x 3/4 inch 6 Barb SxS Manifold

This is the replacement aluminum left bracket for your CoverMate cover lifter.

*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

2 x 3/4 inch 4 Barb SxSp Manifold