Search results for: 'IDX 12700 A'

The 6 horsepower, 1 speed, 56 Frame Sta-Rite / Pentair Pump is a replacement spa motor. Order your motor replacement today and get back to enjoying your spa!

The sensor assembly is specifically designed to go with Down East Spas and Legend Series Master Spas (select 1996-1999 models). It is a replacement for Balboa Dual Sensor Assembly with Temperature and Hi-Limit Sensor. Compatible with all Balboa systems that use this type of sensor.

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

As an all-in-one spa and hot tub treatment kit, the SpaBoss Hot Tub Chemical Starter Kit has everything you need to get your spa or hot tub up and running — and ensure it is always safe and ready to use. As a six-piece hot tub treatment kit, it’s quite an economical option, too!

The Hot Tub Chemical Starter Kit (SKU: X777700) includes:

• Granular pH Plus (1.5 lbs)
• Granular pH Minus (2 lbs)
• Granular Non-Chlorine Shock (2 lbs)
• Granular Chlor-Aid (2 lbs)
• Liquid Prevent II (16 oz)
• AquaChek Test Strips (50 Strips)

The 11 amp, 2 speed 120 volt Pump is an insulated wet end pump designed as a replacement pump.

The 66" x 78" Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular cover folds along the short edge. If you need a cover with these same dimensions (66" x 78") but that folds along the long edge, try our 66 × 78 Inch Hot Tub Cover (Long-edge fold).

The Master Spas® hot tub replacement cover 70" x 84" is an exact Master Spa Factory OEM replacement (SKU: X457084). It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

Note: This particular hot tub cover folds along the short edge. Find the corresponding long-edge fold cover here.

Hot tub cover removal and storage can be difficult, so why not make it easier with a spa CoverShelf by Leisure Concepts. When removing your cover, simply fold it in half and slide it into the shelf, made of sturdy aluminum bars. There, it can rest securely off the ground and without obstructing your view!

Only Master Spa Parts carries the best decal for Twilight Spas’ touch panel at a price that is affordable. With beautiful graphics encased in a waterproof laminate shell, your Spa Touch Panel Overlay for Twilight Spas will return your Twilight Spas hot tub or spa’s touch panel back to its former pristine condition.

The 2 Inch Diverter Valve in Grey by Master Spas is a replacement for your home spa’s original diverter valve, the part of your spa that allows you to control jet water flow. This assembly kit comes with all of the pieces you need to install a new diverter valve in your spa.

The 4.0kW Heater (V/N 55950) is a replacement part for selected models of the H2X Swim Spas (Momentum 80, H2X Momentum) and Michael Phelps Swim Spas (Momentum 80)

Easily installable so you can get back to enjoying your heated Swim spa and hot tub in no time at all.

Replacement filters from Pleatco help our customers get a great value while also keeping their spa's water clean and healthy. If grime and particulates have put a dent in the enjoyment of your spa or hot tub, this Contractor Series and Clarity Spas oval tub filter from Master Spa Parts is a great way to bring back clear water to your spa or hot tub.

Why pay more than you have to? Our Filter PMA20-F2M for Contractor Series & Clarity Spas 415 is the affordable way to keep your spa's water clean, clear, and enjoyable to use. Order yours today!