Search results for: 'master six control board'

The 20 Amp Fuse for Standard Propulsion by Master Spas is a replacement fuse made to go in your home spa. Replacing this fuse ensures that your spa’s PC board operates properly, allowing all of your spa's features to continue to work. The piece is small, affordable and easy to install.

The pressure switch - MAS400 - is specifically designed to replace the original pressure switches in the Legend Series Master Spas 2000 CS models. Control the water pressure in your spa with the right part.

The pressure switch in your spa controls the water pressure in your spa. The pressure switch harness is a replacement part for the original pressure switch harness that allows the pressure switch to be connected to the controls of your spa.

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.

The Master Spas Freeze Plug Kit contains a plug set that works on most spa pumps. This can be loosened to drain any trapped fluid within your pump. Replacing a broken pump ? Make sure to get new freeze plugs as well.

Master Spa Parts offers an OEM 4-button decal for Down East Spas’ legacy models (1999-2003). Since the Down East 4-Button Overlay product is manufactured by Down East Spas, you can expect spectacular results when replacing your original adhesive controller overlay. Plus, a vast majority of Master Spa Parts products ship out within 24 hours of receiving your order!

2 foot Master Spas STS Spa Harness Extension. This unit allows customers to create an extension to the wiring harnesses that come with the theater systems on Master Spa series of hot tubs.

Copper Heater Straps. These are the longer style heater straps. These are the most common heater straps. These heater straps are used to connect power from the PC board and the heater.

The Master Spa® Factory OEM 84" x 70" replacement hot tub cover is specifically designed to fit your Master Spas® hot tub. This replacement custom hot tub cover ensures energy efficiency as it consists of a 1.5lb foam density, 6 inch thick foam insulation that tapers to 4 inch, full-length heat seal cushions that help prevent heat loss, and upgraded black rubber handles.

Note: This particular hot tub cover folds along the long edge. Find the corresponding short-edge fold cover here.

Durable latching Piezo Switch allows customers to easily control the power supply to devices. Lighted switch tells the customer that an electric pulse is being generated and vice versa. Waterproof and especially designed to work with Master Spa hot tub series

The Waterfall Diverter Valve, 1/2" 3-WAY GREY by Master Spas is a replacement part for your home spa’s original waterfall diverter valve. The water diverter valves in your spa allow you to control when and where water flows. The Waterfall Diverter Valve, 1/2" 3-WAY GREY is durable, affordable and easy to install at home.

Controlling your spa experience starts with keeping up with your spa's maintenance. The Grey, 2 Inch Diverter Handle by Master Spas is a replacement piece for your spa’s original diverter valve handle. This piece allows you to switch your diverter valve off and on, thus controlling the flow of water in your spa.