Search results for: 'master swim4 6 6 sts parts'

The 20 Amp Fuse by Master Spas is an exact replacement part for your original fuse. It is made to go in your spa’s PC board and supply power to the rest of your spa and its features. The piece is durable, affordable and will provide prolonged enjoyment of your spa.

Save money with this three-piece EcoPur® Charge filter set! This set includes x268532, x268543, x268546 from Master Spa Parts (and replaces SKU #268603). 

The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

As the "command center" of your spa, the circuit board is tasked with making sure your blowers, lights, air filtration system, and high-limit sensors work correctly. Whether you're looking to replace your Down East Spas MS510/1500/1600 Ext. PCB (V/N 53681) or another unit, Master Spa Parts offers a vast selection of replacement circuit boards. These are all competitively priced and ready to ship.

The Circuit board replacement for Twilight Series™ Spas always ships typically within 24 hours to customers ordering this and other spa circuit boards through the Master Spa Parts online store.

The 2 Inch Diverter Valve in Grey by Master Spas is a replacement for your home spa’s original diverter valve, the part of your spa that allows you to control jet water flow. This assembly kit comes with all of the pieces you need to install a new diverter valve in your spa.

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

Many essential functions of your spa, such as the lights, blowers, safety shut-off, and other critical elements are all dependent on your circuit board running correctly. If yours has failed, we're here to help. Get your hot tub back up and running with this PCB, SUV MAS260 (pre-2005) (v/n 52532), an OEM part from Master Spas®.

Replace your hot tub circuit board with this MAS260 PC board and get complimentary postage to all locations in the Lower 48.

The 8' x 8' (94" x 94") Master Spas® hot tub replacement cover is a Master Spa Factory OEM replacement (SKU: X454888). It is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient, as it's made of a thick 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

The 4.0kW Heater (V/N 55950) is a replacement part for selected models of the H2X Swim Spas (Momentum 80, H2X Momentum) and Michael Phelps Swim Spas (Momentum 80)

Easily installable so you can get back to enjoying your heated Swim spa and hot tub in no time at all.

The 3/8 x 1/4 inch Threaded Barb. This threads into the pump for the constant water feed to your spa pump. Only used on some model pumps.

Call us to verify that this is the right part for your pump.

The Shock Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself and is sold for $34.50 by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

The Master Spa® Factory OEM 82" x 60" replacement hot tub cover (SKU: x458260) is specifically designed to fit your Master Spas® hot tub. This replacement custom hot tub cover ensures energy efficiency as it consists of a 1.5lb foam density, 6-inch thick foam insulation that tapers to 4-inch, full-length heat seal cushions that help prevent heat loss, and upgraded black rubber handles.

Note: This hot tub cover (82" x 60") folds along the long edge.