Search results for: 'remote sp2 side control'

Measure the chemical balance of chlorine based water with AquaChek Chlorine 4-in-1 Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Free Chlorine, pH, Total Alkalinity, Stabilizer (Cyanuric Acid)

1/4 inch Washer for Oversized Snap Cap. These are the beauty caps that cover the screws that hold your side panels on. Available in 2 different sizes and 3 different colors.

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

Regular-sized snap cap to cover the screws on your hot tub or spa. Hide rusty screws and keep them out of sight. This unit is in a espresso (dark) color.

Regular-sized snap cap to cover the screws on your hot tub or spa. Hide rusty screws and keep them out of sight. This unit is in a portabello (greyish) color.

Measure the chemical balance of bromine based water with AquaChek Red 4-in-1 Bromine Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Total Bromine, pH, Total Alkalinity and Total Hardness

Adjust your cover height to your preference, with Ultralift’s Standard Mount hot tub cover. This mount allows you to have the option to increase privacy by having the cover up or store it behind your spa for optimal views.

Regular-sized snap cap to cover the screws on your hot tub or spa. Hide rusty screws and keep them out of sight. This unit is in a light teak color.

Replacement support arm for the CoverMate I Eco B and the inner support arm for the CoverMate Freestyle.

The hydraulic shock is used to support your CoverMate III cover shelf. Easily open and close the hot tub cover with the use of the hydraulic shock that will support the weight of the cover with ease.

The 2 Inch Diverter Valve in Grey by Master Spas is a replacement for your home spa’s original diverter valve, the part of your spa that allows you to control jet water flow. This assembly kit comes with all of the pieces you need to install a new diverter valve in your spa.

This Master Spa Factory OEM 78” x 78” hot tub cover replacement (SKU: X120240)  is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal to help prevent heat loss. It is also made of a high end marine-grade vinyl covering that is mildrew treated, and consists of upgraded rubber grip handles.