Search results for: 'hot to outer spa shock canister'

As an all-in-one spa and hot tub treatment kit, the SpaBoss Hot Tub Chemical Starter Kit has everything you need to get your spa or hot tub up and running — and ensure it is always safe and ready to use. As a six-piece hot tub treatment kit, it’s quite an economical option, too!

The Hot Tub Chemical Starter Kit (SKU: X777700) includes:

• Granular pH Plus (1.5 lbs)
• Granular pH Minus (2 lbs)
• Granular Non-Chlorine Shock (2 lbs)
• Granular Chlor-Aid (2 lbs)
• Liquid Prevent II (16 oz)
• AquaChek Test Strips (50 Strips)

test

Regular Shock for Cover Valet

The Locking Shock for CoverMate 3 a replacement part for the CoverMate 3 hydraulic-assisted cover lift. It is important to remember to unlock the shock before pulling the CoverMate down on to your home spa so that you do not cause damage to the unit. This hydraulic-assisted cover lift is a lower-cost option that still delivers a quality lifting performance of the cover.

*Due to a nationwide shortage of chlorine, prices have increased and supply is very low.*

Spa Ease Oxy Blast can be used as a substitute.

---

SpaBoss Spa Shock (7lb.) is a non-chlorine shock, that is the key to keeping your chlorine or bromine sanitizers working like they should. It will help to get rid of the nasty residue from soap, oils, deodorants, and other organic materials that get into hot tubs from regular use. Comes in a 7lb. container.

SpaBoss Energize oxidizing shock treatment and activates bromide salts

This filter is No Longer Available, and is replaced by X268532.  If you have other questions about filter updates you can refer to this guide or call us at 855-308-2149 for assistance.

Get your spa’s water sparkling clean while also reducing the amount of chlorine necessary to keep your spa sanitized. Master Spa® Eco Pur Filters work wonders in reducing harmful contaminants in your hot tub. Spa filters do make a difference! This Master Spa® Eco Pur Filter can be used with the Replacement Outer Filter or Outer Filter with Microban™ (available from the MSP online store).

The 7x7 Master Spas® hot tub replacement cover (84” x 84”) is a Master Spa Factory OEM replacment (SKU: X454777).

This cover fits other makes of Master Spa, and is the standard at 84" x 84" with a 6" radius.

This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Did you know that the amount of microbes on filtration surfaces can double every 20 minutes? The warm water and organic materials are the perfect breeding grounds for germs. But, with the Pleatco H2X® Trainer & Michael Phelps filter PMA-R4, germs and microbes don’t even have a chance. Pick up your Swim Spa ECO PUR CHARGE System Filter from the Master Spa Parts online store, today!

Measure the chemical balance of your hot tub water with AquaChek Spa 6-in-1 Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Total Chlorine, Total Bromine, Free Chlorine, Total Alkalinity, pH and Total Hardness.

The 84" x 94" Hot Tub Cover is a Master Spa Factory OEM replacement (SKU: x458494). It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular hot tub cover folds along its shortest dimension (the 84" side).

SpaBoss Ultra Spa is the simple and easy product to keep your hot tub water conditioned and your skin soft and smelling fresh. This product works with all sanitizers and hot tub chemicals and contains borates to clarify your spa water.