Search results for: 'logo filter hole forc legend series six'

The 7x7 Master Spas® hot tub replacement cover (84” x 84”) is a Master Spa Factory OEM replacment (SKU: X454777).

This cover fits other makes of Master Spa, and is the standard at 84" x 84" with a 6" radius.

This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

This left support arm for the CoverMate III is a powder coated replacement pivot arm of the original on your hot tub cover

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left arm is on the left side.*

The VL702S Topside Hot Tub Control Panel (SKU: X310190) is a versatile model compatible with numerous models of Down East Spas and Twilight Series™ spas. The seven buttons on this controller are designed for use in low-light and nighttime conditions, as well as an LCD readout display.

This product comes with free shipping!

The 78" x 66" Hot Tub Cover (Long-edge Fold) is an exact Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated.

Note: This particular cover folds along the longer 78" edge. If you need a cover with these same dimensions (66" x 78") but that folds along the short edge, try our 66 × 78 Inch Hot Tub Cover (Short-edge fold).

Several years ago, the manufacturer of Down East Spas discontinued this customer-favorite line of spas and hot tubs. Fortunately, Master Spa Parts still has a variety of spa parts to keep your spa or hot tub up and running. The 1-inch Air Control (Grey) is a quality replacement part for many of the 1999 series of Down East Spas hot tubs and spas.

SpaBoss Spa Clear is the quick way to restore clarity and diamond-like brilliance to your spa or hot tub. Clear water makes hot tubs more enjoyable, so use a reliable product to keep it sparkling.

This is the replacement Bracket Kit for CoverMate II and it can be screw-mounted low on the spa. The Bracket Kit for the CoverMate II is for a model that needs only 18 inches of clearance behind the spa in order to operate. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate II Cover Lift. This part is sold for $73.45 here at Master Spa Parts.

Keep all your essential spa controls within reach with the topside controller for 2017 Twilight Series™ models from Master Spas®. This unit features touch control operation for ease of use. This touch panel only comes with the unit itself, not the protective overlay sticker.

This topside controller comes with free shipping to the continent United States, courtesy of Master Spa Parts!

This is the replacement for X310209, X310213 S/N: 50610 and X310308.

SpaBoss Cal-Rise is the easiest way to increase calcium hardness levels in your hot tub water. Protect your spa or hot tub and the many working parts within the plumbing and heating system by keeping the water chemistry correctly balanced at all times.

The Shock Non-Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

This is the replacement part for the Plastic Bracket Left for CoverMate III for your CoverMate III Cover Lift. Our stylish composite mounting brackets combined with aluminum full-frame construction provides a perfect hydraulic cover lift option with no heavy lifting needed. This part is retails for $47.20 and is sold here at Master Spa Parts.

*To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

This is the replacement Bushing for CoverMate I, CoverMate II and CoverMate III cover lifters. The Bushing is just $3.05 each and is sold here by Master Spa Parts. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lifts that can only be found in the CoverMate series. This part has SKU# 100344 and ships free when it is part of a total order $99 or more from Master Spa Parts.