Search results for: 'blue mounting spx part'

This Deckmount "L" Bracket is used to mount the CoverMate III cover lifter to your deck.

1 inch Spx3/4 inch 90 Degree Ell Barb Adapter

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.

This is the replacement Bracket Kit for CoverMate II and it can be screw-mounted low on the spa. The Bracket Kit for the CoverMate II is for a model that needs only 18 inches of clearance behind the spa in order to operate. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate II Cover Lift. This part is sold for $73.45 here at Master Spa Parts.

The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

This is the replacement part for the Plastic Bracket Left for CoverMate III for your CoverMate III Cover Lift. Our stylish composite mounting brackets combined with aluminum full-frame construction provides a perfect hydraulic cover lift option with no heavy lifting needed. This part is retails for $47.20 and is sold here at Master Spa Parts.

*To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

This is the replacement Bushing for CoverMate I, CoverMate II and CoverMate III cover lifters. The Bushing is just $3.05 each and is sold here by Master Spa Parts. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lifts that can only be found in the CoverMate series. This part has SKU# 100344 and ships free when it is part of a total order $99 or more from Master Spa Parts.

The Blue Water metal remover spa pre-filter is designed with a proprietary filtration medium that includes food-grade carbon. This spa pre-filter works to remove up to 98% of heavy metals, as well as VOCs, TOCs, and other contaminants, allowing you to fill your spa from a variety of sources, such as city water, well water, hard or soft water.

Save money on your spa start-up and get clear water ever fill-up — order the Pure Fill Spa Pre-Filter from Master Spa Parts, today!

The Extended Pivot Arm for CoverMate I is one of the parts that makes up this model of a hydraulic cover lifter. This Extended Pivot Arm has SKU# 100591 and is a replacement part for the CoverMate I, which is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate I during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

The Pump Pad is your key to a quieter running spa/hot tub. Mount your pump on the pad to prevent transmission of the noise and vibration from the motor in your pump. Works well with pumps on most models.

3/4 inch Spx3/4 inch 90 Degree Ell

Ribbed Barb

The Bracket Kit for Master Spas CoverMate I with Master Bracket is one of the sections that makes up the CoverMate I model of a hydraulic cover lifter. This Extended Pivot Arm has SKU# 100571 and is a replacement part for the CoverMate I, which is sold here by Master Spa Parts. The Master bracket attaches to the wood in the upper-right corner to provide additional support.