Search results for: 'switch from test mounted to run'

test

As an all-in-one spa and hot tub treatment kit, the SpaBoss Hot Tub Chemical Starter Kit has everything you need to get your spa or hot tub up and running — and ensure it is always safe and ready to use. As a six-piece hot tub treatment kit, it’s quite an economical option, too!

The Hot Tub Chemical Starter Kit (SKU: X777700) includes:

• Granular pH Plus (1.5 lbs)
• Granular pH Minus (2 lbs)
• Granular Non-Chlorine Shock (2 lbs)
• Granular Chlor-Aid (2 lbs)
• Liquid Prevent II (16 oz)
• AquaChek Test Strips (50 Strips)

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.

KEC Remote Eye. Control your spa’s theater system from the comfort of your hot tub. The KEC Remote Eye turns your clicks on your remote into executable commands that allow you to switch the channels on your television or radio.

The 8.8 Amp 2 speed 56 Frame Pump from Master Spa Parts is designed for flexibility and performance.

SpaBoss X-It makes it easy to switch sanitizers or to lower excessively high levels of chlorine or bromine in your spa or hot tub without having to drain and refill the whole thing.

The Drain Plug for Power WOW is a wet end drain plug for the Pentair Power WOW. This part does not come with an O-ring. The part allows the pump to be drained of stagnant water so protect it from damage and to keep it running for as long as possible.

This is the Pivot Arm for CoverMate II and you will first need to remove the bolt connecting it to the spa mount bracket in order to replace it. The CoverMate II needs 18 inches of clearance behind the spa in order to operate. This part will ship to you free if it is part of a total order that is over $99 from Master Spa Parts.

This Deckmount "L" Bracket is used to mount the CoverMate III cover lifter to your deck.

Controlling your spa experience starts with keeping up with your spa's maintenance. The Grey, 2 Inch Diverter Handle by Master Spas is a replacement piece for your spa’s original diverter valve handle. This piece allows you to switch your diverter valve off and on, thus controlling the flow of water in your spa.

This is the replacement Bracket Kit for CoverMate II and it can be screw-mounted low on the spa. The Bracket Kit for the CoverMate II is for a model that needs only 18 inches of clearance behind the spa in order to operate. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate II Cover Lift. This part is sold for $73.45 here at Master Spa Parts.

The 2 inch Pump O-Ring fits neatly into pump joints/parts that need to create a tight seal. Works with 2 inch nuts.

Get all the parts you need to fully assembly your replacement spa pump.