Search results for: 'tub sts jet plastic hardware'

This is the replacement part for the Plastic Bracket Left for CoverMate III for your CoverMate III Cover Lift. Our stylish composite mounting brackets combined with aluminum full-frame construction provides a perfect hydraulic cover lift option with no heavy lifting needed. This part is retails for $47.20 and is sold here at Master Spa Parts.

*To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

The 7x7 Master Spas® hot tub replacement cover (84” x 84”) is a Master Spa Factory OEM replacment (SKU: X454777).

This cover fits other makes of Master Spa, and is the standard at 84" x 84" with a 6" radius.

This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

The 78" x 66" Hot Tub Cover (Long-edge Fold) is an exact Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated.

Note: This particular cover folds along the longer 78" edge. If you need a cover with these same dimensions (66" x 78") but that folds along the short edge, try our 66 × 78 Inch Hot Tub Cover (Short-edge fold).

Over time, your spa or hot tub’s air controls may wear out, leaving you with less jetting action and much less enjoyment and relaxation. With the 1 Inch Molded Air Control (Grey), Master Spa Parts customers can affordably replace their air controls. This part is compatible with many models of Down East Spas, Freedom Spas, and the Master Spas® Legend Series.

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

The Blue Water metal remover spa pre-filter is designed with a proprietary filtration medium that includes food-grade carbon. This spa pre-filter works to remove up to 98% of heavy metals, as well as VOCs, TOCs, and other contaminants, allowing you to fill your spa from a variety of sources, such as city water, well water, hard or soft water.

Save money on your spa start-up and get clear water ever fill-up — order the Pure Fill Spa Pre-Filter from Master Spa Parts, today!

Replacement screw kit for CoverMate II. This kit includes all of your replacement screws for your CoverMate II cover lifter.

As an all-in-one spa and hot tub treatment kit, the SpaBoss Hot Tub Chemical Starter Kit has everything you need to get your spa or hot tub up and running — and ensure it is always safe and ready to use. As a six-piece hot tub treatment kit, it’s quite an economical option, too!

The Hot Tub Chemical Starter Kit (SKU: X777700) includes:

• Granular pH Plus (1.5 lbs)
• Granular pH Minus (2 lbs)
• Granular Non-Chlorine Shock (2 lbs)
• Granular Chlor-Aid (2 lbs)
• Liquid Prevent II (16 oz)
• AquaChek Test Strips (50 Strips)

This wind strap for your hot tub cover helps to keep your Master Spas hot tub cover in tact during those blustery days! This 16’ long tie down strap is 2” wide and comes with plastic buckles.

Replacement filters from Pleatco help our customers get a great value while also keeping their spa's water clean and healthy. If grime and particulates have put a dent in the enjoyment of your spa or hot tub, this Contractor Series and Clarity Spas oval tub filter from Master Spa Parts is a great way to bring back clear water to your spa or hot tub.

Why pay more than you have to? Our Filter PMA20-F2M for Contractor Series & Clarity Spas 415 is the affordable way to keep your spa's water clean, clear, and enjoyable to use. Order yours today!

5", SST/Pismo Blue Cyclone. These jets are used in Master Spas Healthy Living hot tubs starting in 2013.

Swirl Jet

Cluster Jet Gasket

*These are sold individually*