Search results for: 'ring face scale t rais'

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

SpaBoss pH Minus is a granular product that lowers pH levels and total alkalinity in your hot tub. It’s easy to add by the ounce to quickly adjust the pH levels for a stable hot tub environment.

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

PROLINE Dual Action Cartridge Cleaner is the easy go-to product to keep your hot tub filter working effectively. Spray the cleaner on the filter cartridge for a quick clean or soak overnight to get in deep.

The Charge Filter Set — or, as well like to say, "Go away, algae and bacteria!" kit — features one EcoPur® Charge filter (SKU: X268532) for neutralizing bacteria and biofilm, as well as the Outer Filter (SKU: X268550), a high-performance mineral filter from Pleatco®.

Remember: a healthier, happier spa starts with the right filters — pick up your EcoPur® Charge and Pleatco® mineral filter kit today!

The hydraulic shock is used to support your CoverMate III cover shelf. Easily open and close the hot tub cover with the use of the hydraulic shock that will support the weight of the cover with ease.

The coupler is used to connect the lower and side portions of your CoverMate Easy product.

The Charcoal Legend Neck Pillow replaces the original neck pillow on Legend Series hot tubs from recent years.

This 67" x 78" Hot Tub Cover (Short-edge Fold) hot tub cover replacement (SKU: 457969) is specifically designed to fit your Master Spas® hot tub. This cover ensures you energy efficiency as it is made of a 1.5-pound foam density, six-inch thick foam insulation that tapers to 4-inches along the sides, and a full-length heat seal to prevent heat loss. Additionally, it is made of a high-quality marine-grade vinyl covering that is mildew treated and protects against UV rays. Additionally, it boasts upgraded rubber grip handles.

Note: This particular hot tub cover folds along the shorter 67" edge. 

.

The 1.5 x 2 inch Pump Adapter tailpiece is a pump assembly part commonly used to create a tight seal between pump parts along with the O-ring.

Make sure to buy all the parts you need for complete assembly of your replacement pump.

The Sensor, 24” x ¼” F/560 M7 is a high limit temp replacement sensor for the MAS560 sensor found in most Down East and Legend Series Master Spas.

Don’t let a broken sensor prevent you from your enjoying your spa when you want to.

The 8' x 8' (94" x 94") Master Spas® hot tub replacement cover is a Master Spa Factory OEM replacement (SKU: X454888). It is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient, as it's made of a thick 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.