Search results for: 'hot to coverm staining on spa tub for metal'

Replacement plastic screw kit. This is the replacement screw kit for the CoverMate III

The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

The CoverMate Easy cover lift is a traditional cover lift that is easy to install, extremely durable, and stylish!

The Coupler insert (2 per unit) is a long part used to lengthen your raise and lower bar for your hot tub cover.

This is the replacement Bushing for CoverMate I, CoverMate II and CoverMate III cover lifters. The Bushing is just $3.05 each and is sold here by Master Spa Parts. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lifts that can only be found in the CoverMate series. This part has SKU# 100344 and ships free when it is part of a total order $99 or more from Master Spa Parts.

The Lounge/Small Corner Pillow will replace the hot tub pillow that came in your Master Spa hot tub when you first bought it.

The 108" x 94" Master Spas® replacement hot tub cover (SKU: X454994) is designed to fit your Master Spas® hot tub. This OEM factory hot tub cover comes with a 1. lb foam density, upgraded rubber grip handles and long steam stopper cushions to help prevent heat loss and make it extremely energy efficient!

Note: This cover folds along its longest dimension. 

Our Master Spas® 83" x 70" hot tub cover (SKU: 458771) is a factory direct OEM replacement cover specifically designed to fit your Master Spas® hot tub. Consisting of 1.5lb foam density, long steam stopper cushions, six-inch foam insulation, four inch tapered sides, upgraded rubber grip handles and a 24-R value (the greater the R-value, the better the heat storage and heat retention), this cover prevents heat loss and is extremely energy efficient.

Note: This hot tub cover folds along the long edge.

The Master Spas® hot tub replacement cover 70" x 84" is an exact Master Spa Factory OEM replacement (SKU: X457084). It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

Note: This particular hot tub cover folds along the short edge. Find the corresponding long-edge fold cover here.

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

The Locking Shock for CoverMate 3 a replacement part for the CoverMate 3 hydraulic-assisted cover lift. It is important to remember to unlock the shock before pulling the CoverMate down on to your home spa so that you do not cause damage to the unit. This hydraulic-assisted cover lift is a lower-cost option that still delivers a quality lifting performance of the cover.

The Black Flat Pillow from Master Spa will match your original hot tub pillow.