Search results for: 'option balboa ring kit'

4.5' Resistance Cord

The 11 amp, 2 speed 120 volt Pump is an insulated wet end pump designed as a replacement pump.

Measure the chemical balance of chlorine based water with AquaChek Chlorine 4-in-1 Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Free Chlorine, pH, Total Alkalinity, Stabilizer (Cyanuric Acid)

The 4.0kW Heater (V/N 55950) is a replacement part for selected models of the H2X Swim Spas (Momentum 80, H2X Momentum) and Michael Phelps Swim Spas (Momentum 80)

Easily installable so you can get back to enjoying your heated Swim spa and hot tub in no time at all.

This is the replacement right aluminum bracket or your CoverMate Cover Lifter by Leisure Concepts.

*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.*

The VL702S Topside Hot Tub Control Panel (SKU: X310190) is a versatile model compatible with numerous models of Down East Spas and Twilight Series™ spas. The seven buttons on this controller are designed for use in low-light and nighttime conditions, as well as an LCD readout display.

This product comes with free shipping!

These 52” pivot arms allow for your Ultralift Undermount to be used with a selection of swim spas. This accessory is a great option if you own a swim spa and want to use the Undermount as your cover lifter.

Measure the chemical balance of bromine based water with AquaChek Red 4-in-1 Bromine Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Total Bromine, pH, Total Alkalinity and Total Hardness

Is your current cover lift stealing the your spa’s views and enjoyment? We have the perfect solution! The CoverMate II Cover Lift from Leisure Concepts is easy to use and discreet — it’s there when you need and out of sight when you don’t! With several mounting options, the CoverMate II makes it easy for just about anyone to lift a spa cover on their own — that’s all part of the convenience of owning a CoverMate II Cover Lift! And it’s one of the highest rated cover lifts on the market.

**Please note: ALL COVER LIFTER SALES ARE FINAL and will not work on Swim Spas**

The 2 Inch Diverter Valve in Grey by Master Spas is a replacement for your home spa’s original diverter valve, the part of your spa that allows you to control jet water flow. This assembly kit comes with all of the pieces you need to install a new diverter valve in your spa.

The 1.5 x 2 inch Pump Adapter tailpiece is a pump assembly part commonly used to create a tight seal between pump parts along with the O-ring.

Make sure to buy all the parts you need for complete assembly of your replacement pump.

The Sensor, 24” x ¼” F/560 M7 is a high limit temp replacement sensor for the MAS560 sensor found in most Down East and Legend Series Master Spas.

Don’t let a broken sensor prevent you from your enjoying your spa when you want to.