Search results for: 'swim spa steps with handl rais'

Our Master Spas® 83" x 70" hot tub cover (SKU: 458771) is a factory direct OEM replacement cover specifically designed to fit your Master Spas® hot tub. Consisting of 1.5lb foam density, long steam stopper cushions, six-inch foam insulation, four inch tapered sides, upgraded rubber grip handles and a 24-R value (the greater the R-value, the better the heat storage and heat retention), this cover prevents heat loss and is extremely energy efficient.

Note: This hot tub cover folds along the long edge.

Nothing ruins a good hot tub party like you or a family member taking a tumble down the steps. The Safe-T-Rail in black powder-coated aluminum is the perfect solution to the common problem of slippery hot tub conditions. This hot tub safety rail installs in just 5 minutes and comes with free shipping to the Continental USA by Master Spa Parts.

Your air control helps to regulate the amount of air and water jetted into the tub of your hot tub or spa. A malfunctioning air control valve can drastically reduce the performance and your enjoyment of your spa. Master Spa Parts has the perfect solution.

The DSG LED Lit Air Control 2009 replacement part can help bring back the function of your H2X Swim Spas, Michael Phelps Swim Spas, or Twilight Series of spa or hot tub.

The 7' x 6.5' (84" x 78") Master Spas® replacement hot tub cover (SKU: X454765) is a Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular hot tub cover folds along the long edge. Find the corresponding short-edge fold cover here.

This 67" x 78" Hot Tub Cover (Short-edge Fold) hot tub cover replacement (SKU: 457969) is specifically designed to fit your Master Spas® hot tub. This cover ensures you energy efficiency as it is made of a 1.5-pound foam density, six-inch thick foam insulation that tapers to 4-inches along the sides, and a full-length heat seal to prevent heat loss. Additionally, it is made of a high-quality marine-grade vinyl covering that is mildew treated and protects against UV rays. Additionally, it boasts upgraded rubber grip handles.

Note: This particular hot tub cover folds along the shorter 67" edge. 

.

The Blue Water metal remover spa pre-filter is designed with a proprietary filtration medium that includes food-grade carbon. This spa pre-filter works to remove up to 98% of heavy metals, as well as VOCs, TOCs, and other contaminants, allowing you to fill your spa from a variety of sources, such as city water, well water, hard or soft water.

Save money on your spa start-up and get clear water ever fill-up — order the Pure Fill Spa Pre-Filter from Master Spa Parts, today!

This heater is a replacement part for the original heater in your Master Spas swim spa and hot tub models. Easily installable so you can get back to enjoying your heated Swim spa and hot tub in no time at all.

This is an original heater assembly made by Balboa Group - leaders in manufacturing spa parts.

Features:

The 70" x 83" Hot Tub Cover (Short-edge Fold) (SKU: 457187) is designed to fit your Master Spas® hot tub. This cover ensures extreme energy efficiency as it is made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal to help prevent heat loss. Additionally, it is made of a high end marine-grade vinyl covering that is mildew treated, and consists of upgraded rubber grip handles.

Note: This particular cover folds along the shortest 70-inch edge. For a hot tub cover folding on the long edge, please see 83" x 70" Hot Tub Cover (Long-edge Fold).

The 66" x 78" Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular cover folds along the short edge. If you need a cover with these same dimensions (66" x 78") but that folds along the long edge, try our 66 × 78 Inch Hot Tub Cover (Long-edge fold).

The 30 Amp, FNM30 Fuse for H2X with XP by Master Spas is a replacement power fuse made to go in your swim spa. This fuse supplies the power to your swim spa’s propulsion, so keeping it in working order is vital. The piece is small, affordable and easy to install.

The CoverMate I with Master Bracket is designed for 2014 and older Master Spas swim spas. The “Master Bracket” is designed to screw into the wood frame of the swim spa behind the corner. This gives your cover lifter a way more secure attachment to your swim spa!

Low Profile View and Easy handling Cover Lifter

The CoverMate Vanish XL sets a new standard in spa cover lifters, delivering smooth and easy handling with a modern, integrated look. Its low-profile design seamlessly blends into the spa cabinet, while positioning the cover behind the spa when open—offering a virtually unrestriced view. Engineered for performance and style, the Vanish XL provides effortless lifting and closing, making it a standout choice for any showroom and a must-have for spa owners.

**Please note: ALL COVER LIFTER SALES ARE FINAL.**