Search results for: 'pivot arm cover17 mounted 1'

1/2 inch Hose Valve On / Off Assembly

Over time, your spa or hot tub’s air controls may wear out, leaving you with less jetting action and much less enjoyment and relaxation. With the 1 Inch Molded Air Control (Grey), Master Spa Parts customers can affordably replace their air controls. This part is compatible with many models of Down East Spas, Freedom Spas, and the Master Spas® Legend Series.

The Shock Non-Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

1/2 inch Spx 3/4 inch 90 Barb

6.3 Amp, 1 Speed WOW 12 o'clock Pump

1/4 inch ID x 3/8 inch OD Clear Hose.

Hose is sold by the foot.

The Pump Pad is your key to a quieter running spa/hot tub. Mount your pump on the pad to prevent transmission of the noise and vibration from the motor in your pump. Works well with pumps on most models.

1 inch 100W Titanium Tweeters for spa theater system speakers. Contain high efficiency tweeters from titanium to provide listeners a crisp audio experience. Excellent for most audio systems. Easy installation.

2 Barb, 1 inch Spx 3/8 inch Barb Manifold Manifold

1 inch Spx3/4 inch 90 Degree Ell Barb Adapter

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.

2 x 1 inch Reducer Bushing