Search results for: 'Spa like'

Manufactured by Panel Master as a part-perfect replacement for the original, this five-button control panel is designed to replace the controller on select models of Down East Spas models.

This product comes with free shipping to the contiguous USA!

Measure the chemical balance of your hot tub water with AquaChek Spa 6-in-1 Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Total Chlorine, Total Bromine, Free Chlorine, Total Alkalinity, pH and Total Hardness.

*Due to a nationwide shortage of chlorine, prices have increased and supply is very low.*

Spa Ease Oxy Blast can be used as a substitute.

---

SpaBoss Spa Shock (7lb.) is a non-chlorine shock, that is the key to keeping your chlorine or bromine sanitizers working like they should. It will help to get rid of the nasty residue from soap, oils, deodorants, and other organic materials that get into hot tubs from regular use. Comes in a 7lb. container.

The Bracket Kit for Master Spas CoverMate I with Master Bracket is one of the sections that makes up the CoverMate I model of a hydraulic cover lifter. This Extended Pivot Arm has SKU# 100571 and is a replacement part for the CoverMate I, which is sold here by Master Spa Parts. The Master bracket attaches to the wood in the upper-right corner to provide additional support.

Get the most out of your H2X® or Michael Phelps Signature swim spa by purchasing a high-quality Pleatco® replacement filter PWW50P3 to work alongside your H2X® Eco Filter. All Master Spa Parts orders are shipping out within 48 hours — order your H2X® swim spa filter cartridge replacement today!

Swim Spa Combo-MSWIM15 Overlay 2010

You can only get the same functionality and appearance out of your two-button topside pump control by Down East Spas by choosing a decal made by the original manufacturer. That is why we are proud to offer the Down East 2-Button Overlay product. This decal for your topside pump control offers the same appearance and functionality as your original Down East Spas overlay — but for a fraction at what you’d pay at your local spa or hot tub shop!

The heater gasket o-ring is a replacement part for the o-rings that come with your spa and support the heater gasket so that there is a tight fit. If you don’t see your model listed, it may still work – so please give our customer service a call!

The 7x7 Master Spas® hot tub replacement cover (84” x 84”) is a Master Spa Factory OEM replacment (SKU: X454777).

This cover fits other makes of Master Spa, and is the standard at 84" x 84" with a 6" radius.

This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Masterfully cover vents with this unit. Comes in an attractive black color. All of the Master Spas skirting parts we sell are certified OEM replacement parts direct from Master Spa.

Spa circuit boards play a part in nearly every essential function of your spa or hot tub, everything from jets and temperature controls, to the safety switch-offs and lighting. So, when a board fails, you will likely see decreased function right away. Master Spa Parts aims to stock common and rare types of replacement circuit boards, including this MS2000 PC Board (V/N 52959) for Down East Spas and other brands.

If you're located in the Lower 48, you can also take us up on our free shipping offer on this printed circuit board replacement for MS2000 and many others found in our online store.

Built specifically for Master Spas Legend Series models, the MS8000 System Pack (V/N 53231) is the perfect replacement for your spa’s original control pack.  Install this genuine, OEM control pack to keep your spa running smoothly!