Search results for: 'infinity spd control panel'

Spa circuit boards are among the most crucial pieces of equipment as they control the pumps, heaters, lights, and so many other essential functions. Master Spa Parts is proud to offer this Down East Spas Master Spa Circuit Board MAS460 PC Board (V/N 52551) at a terrific price. Why pay more? Get free shipping to most U.S. destinations — replace your MAS460 spa circuit board from the Master Spa Parts online store, today!

Spa circuit boards play a part in nearly every essential function of your spa or hot tub, everything from jets and temperature controls, to the safety switch-offs and lighting. So, when a board fails, you will likely see decreased function right away. Master Spa Parts aims to stock common and rare types of replacement circuit boards, including this MS2000 PC Board (V/N 52959) for Down East Spas and other brands.

If you're located in the Lower 48, you can also take us up on our free shipping offer on this printed circuit board replacement for MS2000 and many others found in our online store.

If a spa repair technician has said you have a broken circuit board, you may wonder what it means. Well, a circuit board controls the most basic functions of your spa, including the jet pumps, heating regulation system, as well as lighting and automatic shut-off safety switches.

As a company geared towards delivering the best in prices, products, and services, Master Spa Parts is proud to offer the MS5000 PC Board (V/N 54492; starting S/N and many other Master Spas® parts in our store.

If you're in the Lower 48, this Circuit board for MS5000 will qualify for free shipping — order yours today!

As the "brain" of your hot tub, the circuit board plays a huge part in controlling water flow, filtration system, high-limit sensor, jets, lights, and blowers. Within our online store, Master Spa Parts offers a bountiful selection of hot tub circuit boards, all competitively priced. This MS81 Spa Pc Board from Master Spas® is especially appealing to those looking to bring their spa or hot tub back to a fully functional state. Our online store carries the Michael Phelps swim spa board PC board, as well as many economically priced replacement parts. Order today and get fast, free shipping from Master Spa Parts!

The Master Spa® Factory OEM 84" x 70" replacement hot tub cover is specifically designed to fit your Master Spas® hot tub. This replacement custom hot tub cover ensures energy efficiency as it consists of a 1.5lb foam density, 6 inch thick foam insulation that tapers to 4 inch, full-length heat seal cushions that help prevent heat loss, and upgraded black rubber handles.

Note: This particular hot tub cover folds along the long edge. Find the corresponding short-edge fold cover here.

This 67" x 78" Hot Tub Cover (Short-edge Fold) hot tub cover replacement (SKU: 457969) is specifically designed to fit your Master Spas® hot tub. This cover ensures you energy efficiency as it is made of a 1.5-pound foam density, six-inch thick foam insulation that tapers to 4-inches along the sides, and a full-length heat seal to prevent heat loss. Additionally, it is made of a high-quality marine-grade vinyl covering that is mildew treated and protects against UV rays. Additionally, it boasts upgraded rubber grip handles.

Note: This particular hot tub cover folds along the shorter 67" edge. 

.

The 70" x 83" Hot Tub Cover (Short-edge Fold) (SKU: 457187) is designed to fit your Master Spas® hot tub. This cover ensures extreme energy efficiency as it is made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal to help prevent heat loss. Additionally, it is made of a high end marine-grade vinyl covering that is mildew treated, and consists of upgraded rubber grip handles.

Note: This particular cover folds along the shortest 70-inch edge. For a hot tub cover folding on the long edge, please see 83" x 70" Hot Tub Cover (Long-edge Fold).

The 66" x 78" Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular cover folds along the short edge. If you need a cover with these same dimensions (66" x 78") but that folds along the long edge, try our 66 × 78 Inch Hot Tub Cover (Long-edge fold).

This Master Spa Factory OEM 79" x 69" hot tub cover replacement (SKU: 457969) is specifically designed to fit your Master Spas® hot tub. This cover ensures energy efficiency as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal to help prevent heat loss. Additionally, it is made of a high end marine-grade vinyl covering that is mildew treated, and consists of upgraded rubber grip handles.

Note: This 79" x 69" hot tub cover folds along the long edge. 

Our Master Spas® 83" x 70" hot tub cover (SKU: 458771) is a factory direct OEM replacement cover specifically designed to fit your Master Spas® hot tub. Consisting of 1.5lb foam density, long steam stopper cushions, six-inch foam insulation, four inch tapered sides, upgraded rubber grip handles and a 24-R value (the greater the R-value, the better the heat storage and heat retention), this cover prevents heat loss and is extremely energy efficient.

Note: This hot tub cover folds along the long edge.

This Master Spa Factory OEM 66" x 84" hot tub cover replacement (SKU: X456684) is specifically designed to fit your Master Spas® hot tub. This cover ensures energy efficiency as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal to help prevent heat loss. Additionally, it is made of a high end marine-grade vinyl covering that is mildew treated, and consists of upgraded rubber grip handles.

Note: This particular hot tub cover folds along the short edge. Find the corresponding long-edge fold cover here.

The 78" x 66" Hot Tub Cover (Long-edge Fold) is an exact Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated.

Note: This particular cover folds along the longer 78" edge. If you need a cover with these same dimensions (66" x 78") but that folds along the short edge, try our 66 × 78 Inch Hot Tub Cover (Short-edge fold).