Search results for: 'plus mounting'

As an all-in-one spa and hot tub treatment kit, the SpaBoss Hot Tub Chemical Starter Kit has everything you need to get your spa or hot tub up and running — and ensure it is always safe and ready to use. As a six-piece hot tub treatment kit, it’s quite an economical option, too!

The Hot Tub Chemical Starter Kit (SKU: X777700) includes:

• Granular pH Plus (1.5 lbs)
• Granular pH Minus (2 lbs)
• Granular Non-Chlorine Shock (2 lbs)
• Granular Chlor-Aid (2 lbs)
• Liquid Prevent II (16 oz)
• AquaChek Test Strips (50 Strips)

This Deckmount "L" Bracket is used to mount the CoverMate III cover lifter to your deck.

Keep your water from becoming rusty, brown or clouded with the use of Spa Ease Stain and Scale.

This is the replacement Bracket Kit for CoverMate II and it can be screw-mounted low on the spa. The Bracket Kit for the CoverMate II is for a model that needs only 18 inches of clearance behind the spa in order to operate. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate II Cover Lift. This part is sold for $73.45 here at Master Spa Parts.

This is the Pivot Arm for CoverMate II and you will first need to remove the bolt connecting it to the spa mount bracket in order to replace it. The CoverMate II needs 18 inches of clearance behind the spa in order to operate. This part will ship to you free if it is part of a total order that is over $99 from Master Spa Parts.

This Understyle Screw Kit for CoverMate II by Leisure Concepts is an OEM factory replacement screw kit.

The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

At Master Spa Parts, we carry the Master Spas® Legend® Series Topside Controller Decal to replace controller overlays from the late 1990s and early 2000s. This Standard Series Overlay features beautiful graphics and will stand up to years of constant heat and humidity.

This is the replacement part for the Plastic Bracket Left for CoverMate III for your CoverMate III Cover Lift. Our stylish composite mounting brackets combined with aluminum full-frame construction provides a perfect hydraulic cover lift option with no heavy lifting needed. This part is retails for $47.20 and is sold here at Master Spa Parts.

*To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

This extender bracket set is used for and with the Leisure Concepts CoverMate III Eco B Cover Lifter

Looking to replace the topside control decal on an LSX557 (Legend® Series) spa? Master Spa Parts has just the part you need! We source adhesive overlays directly from Master Spas®, ensuring a perfect fit and appearance. Plus, you have the benefit of ordering the LSX557 Overlay for MS1600 at our low, everyday price.

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.