Search results for: 'side thread for swim 6 st'

Foam Kickboard

The MP Legend Charcoal Pillow works with the Legend Series Master Spas. It can be installed easily to add comfort to your hot tub experience.

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

Temperature Sensor Mount. Used in older style Master Spas to secure the flow sensor to the spa. A new mount should always be installed when you are replacing your spa sensor unit.

This mount should fit with most sensors.

Measure the chemical balance of chlorine based water with AquaChek Chlorine 4-in-1 Test Strips in 15 seconds.

• Count: 50 test strips
• Tests for: Free Chlorine, pH, Total Alkalinity, Stabilizer (Cyanuric Acid)

The 12-inch A&B M7 Temp/High Sensor is a replacement sensor for several Spa models including the Clarity, Down East, Contractor, Freedom, Getaway, H2X Swim Spas, Healthy Living Hot Spas, Legacy Whirlpool, Legend Series Master Spas, Michael Phelps Swim Spas and Twilight Series Spas. If you don’t see your model listed, it may still work – so please give our customer service a call!

Cover Valet Top Mount Cover Lifter It is designed to fit in almost any backyard environment: inside of a gazebo, against a wall, or even mounted into an existing deck. Dual gas springs assist in effortlessly lifting and lowering the spa cover. A locking safety feature holds the cover open until it is time to be closed. A durable powder coat finish accompanied by stainless steel hardware allows the Cover Valet to be equipped with an industry leading 5 year warranty.

**Please note: ALL COVER LIFT SALES ARE FINAL.** 

Stainless steel 3/8" Hex Nut is designed to be used on the fastening components of your spa propulsion system. Stay safe and keep your spa components from coming apart.

1/4 inch Washer for Oversized Snap Cap. These are the beauty caps that cover the screws that hold your side panels on. Available in 2 different sizes and 3 different colors.

Replacement filters from Pleatco help our customers get a great value while also keeping their spa's water clean and healthy. If grime and particulates have put a dent in the enjoyment of your spa or hot tub, this Contractor Series and Clarity Spas oval tub filter from Master Spa Parts is a great way to bring back clear water to your spa or hot tub.

Why pay more than you have to? Our Filter PMA20-F2M for Contractor Series & Clarity Spas 415 is the affordable way to keep your spa's water clean, clear, and enjoyable to use. Order yours today!

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

This heater is a replacement part for the original heater in your Master Spas swim spa and hot tub models. Easily installable so you can get back to enjoying your heated Swim spa and hot tub in no time at all.

This is an original heater assembly made by Balboa Group - leaders in manufacturing spa parts.

Features: