Search results for: '15 seri 6 6 sts panel'

This left support arm for the CoverMate III is a powder coated replacement pivot arm of the original on your hot tub cover

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left arm is on the left side.*

Don’t allow a broken pump to spoil your hot tub fun ! The Center Discharge, 120V Aqua-Flo Circ Pump is a replacement OEM pump designed for select Down East Spas and Legend Series Master Spas. Manufactured by world renowned Emerson.

This product replaces x321791 (There may have to be plumbing done or the original pump mounts moved in order to get this pump to replace the x321791).

This Master Spa Factory OEM 78” x 78” hot tub cover replacement (SKU: X120240)  is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal to help prevent heat loss. It is also made of a high end marine-grade vinyl covering that is mildrew treated, and consists of upgraded rubber grip handles.

The 6.5×7 Master Spas® (78" x 84") hot tub cover replacement (SKU: X454657) is specifically designed to fit your Master Spas® hot tub. This cover ensures energy efficiency as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal to help prevent heat loss. Additionally, it is made of a high end marine-grade vinyl covering that is mildew treated, and consists of upgraded rubber grip handles.

Note: This particular hot tub cover folds along the short edge. Find the corresponding long-edge fold cover here.

The Master Spas® hot tub replacement cover 70" x 84" is an exact Master Spa Factory OEM replacement (SKU: X457084). It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

Note: This particular hot tub cover folds along the short edge. Find the corresponding long-edge fold cover here.

The 7' x 6.5' (84" x 78") Master Spas® replacement hot tub cover (SKU: X454765) is a Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular hot tub cover folds along the long edge. Find the corresponding short-edge fold cover here.

The 84" x 94" Hot Tub Cover is a Master Spa Factory OEM replacement (SKU: x458494). It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular hot tub cover folds along its shortest dimension (the 84" side).

The 8' x 8' (94" x 94") Master Spas® hot tub replacement cover is a Master Spa Factory OEM replacement (SKU: X454888). It is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient, as it's made of a thick 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

All hot tubs use a circuit board to manage essential functions, such as the filtration system, lighting, pumps, as well as shut-off functions designed to keep users safe. So, a circuit board that has stopped working can really hamper the enjoyment of your spa. Master Spa Parts to the rescue! We have a vast inventory of replacement circuit boards, including this MAS1600 PC Board (V/N 55241).

To restore service to your hot tub, Master Spa Parts include fast, complimentary shipping for customers buying this New MAS1600 circuit board in the Continental United States.

Several years ago, the manufacturer of Down East Spas discontinued this customer-favorite line of spas and hot tubs. Fortunately, Master Spa Parts still has a variety of spa parts to keep your spa or hot tub up and running. The 1-inch Air Control (Grey) is a quality replacement part for many of the 1999 series of Down East Spas hot tubs and spas.

Master Spa Parts offers an OEM 4-button decal for Down East Spas’ legacy models (1999-2003). Since the Down East 4-Button Overlay product is manufactured by Down East Spas, you can expect spectacular results when replacing your original adhesive controller overlay. Plus, a vast majority of Master Spa Parts products ship out within 24 hours of receiving your order!

SKU: X508055

At Master Spa Parts, we carry manufacturer-original pump control decal replacements including Down East Spas’ 7-button pump control decal. These are sold at the lowest prices and ship ultra-fast! Since the same people who manufactured your spa make these decals, the Down East 3 Pump 510S Pack Overlay will be the perfect replacement for your Down East Spas spa or hot tub.