Search results for: 'today fit swirl spa ep 15'

1/4 inch Washer for Oversized Snap Cap. These are the beauty caps that cover the screws that hold your side panels on. Available in 2 different sizes and 3 different colors.

The 1.5 inch Pump Split Nut is a replacement part for your pump union that needs to be re-plumbed.

Need to replacement your entire pump unit ? Don’t forget to buy all the parts you need to fully assemble the pump.

The Charge Filter Set — or, as well like to say, "Go away, algae and bacteria!" kit — features one EcoPur® Charge filter (SKU: X268532) for neutralizing bacteria and biofilm, as well as the Outer Filter (SKU: X268550), a high-performance mineral filter from Pleatco®.

Remember: a healthier, happier spa starts with the right filters — pick up your EcoPur® Charge and Pleatco® mineral filter kit today!

The 1.5 x 2 inch Pump Adapter tailpiece is a pump assembly part commonly used to create a tight seal between pump parts along with the O-ring.

Make sure to buy all the parts you need for complete assembly of your replacement pump.

Spa circuit boards play a part in nearly every essential function of your spa or hot tub, everything from jets and temperature controls, to the safety switch-offs and lighting. So, when a board fails, you will likely see decreased function right away. Master Spa Parts aims to stock common and rare types of replacement circuit boards, including this MS2000 PC Board (V/N 52959) for Down East Spas and other brands.

If you're located in the Lower 48, you can also take us up on our free shipping offer on this printed circuit board replacement for MS2000 and many others found in our online store.

Copper Heater Straps. These are the longer style heater straps. These are the most common heater straps. These heater straps are used to connect power from the PC board and the heater.

The 2 inch Pump Split Nut is used as a replacement for the pump union that would need to be re-plumbed. You can cut off the old pump union and replace with this split nut. This comes with the 2 screws that screw and hold it together.

Spa heaters, automated systems, lights, and salt-water chlorinators all depend on a functional circuit board. With Master Spas®' MS50 U PC board, you can bring back the functionality of your spa or hot tub. Get this MS50 PCB fast and free from the Master Spa Parts warehouse when you order from our online store.

KEC Remote Eye. Control your spa’s theater system from the comfort of your hot tub. The KEC Remote Eye turns your clicks on your remote into executable commands that allow you to switch the channels on your television or radio.

The 66" x 78" Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Note: This particular cover folds along the short edge. If you need a cover with these same dimensions (66" x 78") but that folds along the long edge, try our 66 × 78 Inch Hot Tub Cover (Long-edge fold).

The 78" x 66" Hot Tub Cover (Long-edge Fold) is an exact Master Spa Factory OEM replacement. It is specifically designed to fit your Master Spas® hot tub. This cover is extremely energy efficient, as it's made of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full-length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated.

Note: This particular cover folds along the longer 78" edge. If you need a cover with these same dimensions (66" x 78") but that folds along the short edge, try our 66 × 78 Inch Hot Tub Cover (Short-edge fold).

Replacement Control Panel for Michael Phelps Swim Spas

MP8 Control Panel