Search results for: 'Replacement head rest master spas'
- Related search terms
- Master Spa - CLSEPRSET3 - Clarity & Healthy Living EPR Filter Set - (2) X268548 - PMA-R3 and PMA-EPR - (1) X268532
- Master Spa - X232607 - 1" Lighted Halo Air Control
- Master Spas - Topside Panel, MP900, No Overlay, For MS40 - X310203, 50305
- Master Spa - X245375 - 2 inch DSG 6-Spoke Diverter
- Master Spas, Down East, Emerald Spas Suction Drain Cover, 4-7/8 inch 0.D. VGB Law Compliant Replaced 0bsolete Original
Measure the chemical balance of your hot tub water with AquaChek Spa 6-in-1 Test Strips in 15 seconds.
- Count: 50 test strips
- Tests for: Total Chlorine, Total Bromine, Free Chlorine, Total Alkalinity, pH and Total Hardness.
-
This left support arm for the CoverMate III is a powder coated replacement pivot arm of the original on your hot tub cover
*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left arm is on the left side.*
-
Replacement screw kit for CoverMate III DeckMount brackets
-
The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.
-
The right outer handle is a powder-coated aluminum part that is used to easily open and close your CoverMate Freestyle.
*To determine if this is the correct replacement handle you need, look at your cover in the open position. While facing the open cover, the right handle is on right side.*
-
Are you tired of replacing pool or spa filters simply because they are too difficult to clean? The Filter Flosser attaches to your garden hose to easily wash away dirt and debris from your filter. The Pleatco Filter Flosser works with aquatic filters for spas, hot tubs, and pools.
-
The 66" x 78" Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.
Note: This particular cover folds along the short edge. If you need a cover with these same dimensions (66" x 78") but that folds along the long edge, try our 66 × 78 Inch Hot Tub Cover (Long-edge fold).
-
Durable latching Piezo Switch allows customers to easily control the power supply to devices. Lighted switch tells the customer that an electric pulse is being generated and vice versa. Waterproof and especially designed to work with Master Spa hot tub series
-
One of the things we love about the Swim Spa Eco Pur Filter is that is can reduce your chemical consumption by up to 75% while cleansing your spa or hot tub of harmful contaminants, bacteria, and microbes. Essentially, this mineral filter for Swim Spas is the filter that pays for itself!
This Eco Pur pure filter works with most Master Spa® H2X & Michael Phelps Swim Spas.
