Search results for: 'white breaker arm needed forc thi challenger 19'

The Shock Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself and is sold for $34.50 by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

This is the replacement aluminum left bracket for your CoverMate cover lifter.

*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*

Putting on and taking off spa and hot tub covers can be tiring for even physically fit individuals. If you’ve put off getting a cover lifter because you haven’t found a cover lift that fits behind your spa, you’re in luck; CoverMate III only requires 6” of clearance space and locks shock locks into place — and that’s just a few of the many benefits of this customer-favorite hydraulic spa cover lift from Leisure Concepts.

**Please note: ALL COVER LIFTER SALES ARE FINAL.** 

The CoverCatch helps keep your spa cover close by and off the ground! It is ideal for smaller sizes spas and covers.

This is the replacement right Large Bracket Cover for the CoverMate III cover lifter.

*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the right large bracket cover is on the right side.*

The 1.5 inch Pump O-Ring fits neatly into pump joints/parts that need to create a tight seal. Works with 2 inch nuts.

Get all the parts you need to fully assembly your replacement spa pump.

The 2 inch Pump O-Ring fits neatly into pump joints/parts that need to create a tight seal. Works with 2 inch nuts.

Get all the parts you need to fully assembly your replacement spa pump.

Nothing ruins a good hot tub party like you or a family member taking a tumble down the steps. The Safe-T-Rail in black powder-coated aluminum is the perfect solution to the common problem of slippery hot tub conditions. This hot tub safety rail installs in just 5 minutes and comes with free shipping to the Continental USA by Master Spa Parts.

The 1.5 inch Pump Split Nut is a replacement part for your pump union that needs to be re-plumbed.

Need to replacement your entire pump unit ? Don’t forget to buy all the parts you need to fully assemble the pump.

The Shock Non-Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

The 4’ Cable Extension for Balboa Stereo gives you the extra reach you need to achieve the sound system setup you want for your hot tub area. Order this part (SKU#X311011) from Master Spa Parts toady.

This is a OEM factory direct replacement rubber stopper smash cap for the CoverMate I hot tub cover. Easily replace your old smash cap with this replacement!