Search results for: 'twilight st 82 air control from jet 1'

The Charge Filter Set — or, as well like to say, "Go away, algae and bacteria!" kit — features one EcoPur® Charge filter (SKU: X268532) for neutralizing bacteria and biofilm, as well as the Outer Filter (SKU: X268550), a high-performance mineral filter from Pleatco®.

Remember: a healthier, happier spa starts with the right filters — pick up your EcoPur® Charge and Pleatco® mineral filter kit today!

Eco Pur Charge filters by Master Spas can help reduce your chlorine usage by up to 75%, while also extending the lifetime of your spa or hot tub. The new Eco Pur Charge Filter is the replacement for all previous Eco Pur Mineral cartridges for Master Spas hot tubs. Choose the best for your spa and save time and money — order an Eco Pur filter today.

The replacement, factory direct left outer handle is a powder-coated aluminum part that is used to easily open and close your CoverMate Freestyle.

*To determine if this is the correct replacement handle you need, look at your hot tub cover in the open position. While facing the spa and open cover lifter, the left outer handle is on the left side.*

With free shipping to the Continental United States, Master Spa Parts has EcoPur® Charge filters for the Legacy Whirlpool spas available at a wonderful price. These filters remove heavy metals, biofilm, and bacteria that are bad for bathers and spa mechanisms.

Let's get you sitting pretty — order the Legacy EcoPur® Charge White Filter Set by Pleatco® today from Master Spa Parts!

This filter set replaces 268609, X268701, X268702 and x268706

This Master Spa Factory OEM 78” x 78” hot tub cover replacement (SKU: X120240)  is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient as it consists of a 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal to help prevent heat loss. It is also made of a high end marine-grade vinyl covering that is mildrew treated, and consists of upgraded rubber grip handles.

The right cover piece snaps into the fitted location on the right side and covers all the pieces on that side.

*To determine if this is the correct replacement cover piece you need, look at your hot tub cover in the open position. While facing the spa and open cover lifter, the right cover piece is on the right side.*

This left cover piece for the CoverMate III cover lifter snaps into the fitted location on the left side and covers all the pieces found there.

*To determine if this is the correct replacement cover pieceyou need, look at your hot tub cover in the open position. While facing the spa and open cover lifter, the left cover piece is on the left side.*

If replacing one suction cover, it is highly recommended that you replace all of them to be compliant. These suction covers are available for replacement of your older suction covers (spa models pre-2009). There is however no guarantee that these suction covers will fit your pre-2009 spa.

The Shock Non-Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

The Shock Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself and is sold for $34.50 by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

When a spa's printed circuit board (PCB) fails it can mean the lights, pumps, safety shut-offs, filtering systems, or all of the above will not function as expected. With products such as the MS1700 Circuit Board V/N: 56157 and others for Michael Phelps swim spas, Master Spa Parts can have your spa up and running in no time.

Customers in the Lower 48 can also take advantage of our quick, complimentary shipping offer on this MS1700 circuit board replacement and others $99 and over.

If you think of your spa's pumps, lights, blowers, and other features as members of an orchestra, the circuit board would be the conductor. Master Spa Parts is here to bring back harmony to your Master Spas® hot tub with our Circuit Board MAS100 PC Board (V/N 53065).

Having a fully functional circuit board is essential, overpaying for your board isn't. That's why Master Spa Parts keeps our rates low so you can affordably replace a MAS100 circuit board — and don’t forget fast, free shipping to the Lower 48!