Search results for: 'spa covers 18 x 94'
- Did you mean
- sp1 cover17 18 x 94
- sp1 cover13 18 x 94
- Related search terms
- SPA CLEANER DESINFECTANT
- Spa ozone check valve 7-2108-01
- spa fill hose filter
- Spa hydrolics lift cover
- Spa Filter 4 7/8
3V x 400 Brando V belt for XP Pro Propulsion System
-
The 3/8 x 1/4 inch Threaded Barb. This threads into the pump for the constant water feed to your spa pump. Only used on some model pumps.
Call us to verify that this is the right part for your pump.
-
2 x 3/4 inch 4 Barb SxSp Manifold
-
This is the Locking Shock for the Cover Valet.
This locking shocks for your Cover Valet are the OEM, replacement part for the original shocks on the cover valet equipment.
-
The Sensor, 24” x ¼” F/560 M7 is a high limit temp replacement sensor for the MAS560 sensor found in most Down East and Legend Series Master Spas.
Don’t let a broken sensor prevent you from your enjoying your spa when you want to.
-
The 1.5 x 2 inch Pump Adapter tailpiece is a pump assembly part commonly used to create a tight seal between pump parts along with the O-ring.
Make sure to buy all the parts you need for complete assembly of your replacement pump.
-
This is the replacement right aluminum bracket or your CoverMate Cover Lifter by Leisure Concepts.
*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.*
-
This is the Pivot Arm for CoverMate II and you will first need to remove the bolt connecting it to the spa mount bracket in order to replace it. The CoverMate II needs 18 inches of clearance behind the spa in order to operate. This part will ship to you free if it is part of a total order that is over $99 from Master Spa Parts.
