Search results for: 'clarity sp2 top side board'

The .3 Amp Fuse by Master Spas is a durable, affordable replacement fuse made to go in your home spa’s PC board. When it is working correctly, the fuse supplies power to your spa’s control pack so that you can fully enjoy your spa and all of its relaxing features.

This left cover piece for the CoverMate III cover lifter snaps into the fitted location on the left side and covers all the pieces found there.

*To determine if this is the correct replacement cover pieceyou need, look at your hot tub cover in the open position. While facing the spa and open cover lifter, the left cover piece is on the left side.*

Copper Heater Straps are used for connection of the Heater Unit of your spa to the Board within the Spa pack.

Easily installed.

Protect your speaker from excessive vibrations using the 80W Speaker Spider. The 100W Speaker Spider centers moving parts of the speaker allowing vibrations in an in and out motion instead of moving from side to side which can destroy your speakers.

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

BWG Heater Plug N Click Adapter

This adapter eliminates the copper straps going from the heater to the circuit board. 

**This needs to be used on all heaters that come with the plug that is already attached. Removing the plug on the heater will void the warranty.**

Cooper Heater Strap. This is the shorter style of the 3 we have in stock (SKU #: 300016, SKU #: 300390). Copper construction provides easily installation for connecting your spa heater to the PC Board.

This replacement product has a SKU number of X320048 and is enclosed in plastic to protect it from water that may cause corrosion. This is the Replacement Ozone product that is engineered and manufactured by Aqua Sun Ozone International. fits in a variety of models in the following models of home spas.

This is a copper jumper strap normally used with the ground wires in the spa. These are mounted on the back of the pumps connecting the ground wire. Is part of the connections from the heater to the PC Board.

The 12-inch A&B M7 Temp/High Sensor is a replacement sensor for several Spa models including the Clarity, Down East, Contractor, Freedom, Getaway, H2X Swim Spas, Healthy Living Hot Spas, Legacy Whirlpool, Legend Series Master Spas, Michael Phelps Swim Spas and Twilight Series Spas. If you don’t see your model listed, it may still work – so please give our customer service a call!

Copper Heater Straps. These are the longer style heater straps. These are the most common heater straps. These heater straps are used to connect power from the PC board and the heater.

Overlay for Therapool with Master Spas MAS360 PC Board