Search results for: 'part for steps'

The 3-inch poly planar shell speaker is perfect for small spaces or when space is at a premium. Enjoy crisp sound from your spa theater system. It is a 3-inch cone with metallic waterproof finish.

The Shock Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself and is sold for $34.50 by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

Control your spa entertainment system using this waterproof unit. UV and Salt resistant Wired Stereo Remote is designed and built to withstand the harsh conditions that come with spa use.

This is the Locking Shock for the Cover Valet.

This locking shocks for your Cover Valet are the OEM, replacement part for the original shocks on the cover valet equipment.

The Coupler insert (2 per unit) is a long part used to lengthen your raise and lower bar for your hot tub cover.

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

The Grey Terminal Block for H2X is designed specifically to work with your H2X Swim Spa. Feed through up to 750V through this Terminal Block.

The Windsor STS TV Lift Stand is a replacement TV Lift for your Windsor Spa Model STS (standard television set). Enjoy your favorite TV programming in your tub from any angle.

If all of the sudden, you find your spa's jet pumps, filters, jets, or water temperature stability begin to fail all at once, there's a good chance it may be due to the circuit board.

When you check out our online store, you'll find the Master Spas® 501X daughter pc board from Master Spas® and many other economical spa circuit boards. You can expect fast and free shipping options when you purchase this Momentum 80 circuit board replacement from the Master Spa Parts online store. 

The 2 inch Pump Split Nut is used as a replacement for the pump union that would need to be re-plumbed. You can cut off the old pump union and replace with this split nut. This comes with the 2 screws that screw and hold it together.

The heater gasket o-ring is a replacement part for the o-rings that come with your spa and support the heater gasket so that there is a tight fit. If you don’t see your model listed, it may still work – so please give our customer service a call!

The O-Ring for Power WOW Drain Plug is the O-ring that goes with the drain plug for the Pentair Power WOW pump (SKU : X275230).This creates a tight seal for wet end drain.