Search results for: 'st lifter sx cap'

The right cover piece snaps into the fitted location on the right side and covers all the pieces on that side.

*To determine if this is the correct replacement cover piece you need, look at your hot tub cover in the open position. While facing the spa and open cover lifter, the right cover piece is on the right side.*

This replacement OEM factory direct coupler insert is a long part used to lengthen your raise and lower bar for your hot tub cover.

The Bracket Kit for CoverMate I is one of the parts that makes up this model of a hydraulic cover lifter. This Bracket Kit for CoverMate I SKU number is: 100267.It is recommended that you do not use the CoverMate I during high winds as to protect the cover and the hydraulic cover lifter from possible damage.

Thumbscrew 1/4 - 20 x 1.75 inch. These are used to secure your corner skirting pieces on your spa in place. This part is the longer of the two thumb-screws available.

The Down East Spas-manufactured six-button topside pump control decal is carried by Master Spa Parts at a tremendous value. This decal features the same graphics, tactical feel, and precision cuts as your original Cape Cod 3, Exeter 3, Portsmouth 3, Windsor 3, or Windsor 3 STS spa.

Order the Down East 2-Pump, 6-Button Overlay 2010 from the Master Spa Parts online store, today!

SpaBoss Cal-Rise is the easiest way to increase calcium hardness levels in your hot tub water. Protect your spa or hot tub and the many working parts within the plumbing and heating system by keeping the water chemistry correctly balanced at all times.

Quickly and easily clean away dirt and debris from your pool and spa performance filters with the Power Pic Reach! The 100% aluminum nozzle with last you season to season and will save you money by preserving the life of your expensive filters!

Have your original Down East Spas single or dual-pump topside control decal seen better days? Master Spa Parts offers the high-quality, OEM Overlay for Down East 1 & 2 Pump for MP30. This waterproof laminate will restore the function and appearance of your Down East Spa model’s topside controller.

This support arm lower for CoverMate Easy by Leisure Concepts is a direct OEM replacement for your original hot tub cover support arm.

This ball stud for the CoverMate III SKU 100244 are the direct replacement parts for the original ball studs on your hot tub cover lift.
**These are sold individually**

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

SpaBoss Chlor-Aid (2 lb.) is the easy way to disinfect your hot tub water and keep it free from algae and bacteria that can lead to unwanted side effects. This granular chlorine product immediately disinfects water, keeping it clean and clear. Additionally, Chlor-Aid will not disturb the pH or alkalinity balance in your water.