Search results for: 'THERMOSTAT FOR MARQUIS SPA'

15 Sq. Ft. Filter PMA15P3 for Legacy Spas

The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.

*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*

This is the Plastic Bracket Right for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part retails for $47.20 here at Master Spa Parts.

**To determine if this is the correct replacement bracket you need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.**

This is the Extended Pivot Arm for CoverMate III and it is a replacement part for your CoverMate III Cover Lift. There is a reliability, ease of operation and ultimate beauty to the hydraulic cover lift that can only be found in the CoverMate III Cover Lift. This part is 43 inches long and is sold here at Master Spa Parts.

This replacement plastic screw kit is the main screw kit you need for your CoverMate 1 by Leisure Concepts.

The O-Ring for Power WOW Drain Plug is the O-ring that goes with the drain plug for the Pentair Power WOW pump (SKU : X275230).This creates a tight seal for wet end drain.

The 8' x 8' (94" x 94") Master Spas® hot tub replacement cover is a Master Spa Factory OEM replacement (SKU: X454888). It is specifically designed to fit your Master Spas® hot tub. This cover is energy efficient, as it's made of a thick 1.5-pound foam density, six-inch thick foam insulation (which tapers to 4-inches along the sides), and a full length heat seal. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and protects against UV rays.

Replacement screw kit for CoverMate II. This kit includes all of your replacement screws for your CoverMate II cover lifter.

MS8000 Relay for FST. This unit reverses polarity of the power in your spa’s entertainment system to raise and lower the television.

The 5 Amp Slow Blow (FST) by Master Spas is a replacement fuse made to go in your home spa. The fuse allows a greater level of power to flow without disrupting the circuit or blowing the fuse itself. The piece is affordable, easy to install and can be a simple fix for a problem with your spa

The pivot arm for the CoverMate III is a direct OEM factory replacement for the original bar.

Keep your spa's sound system playing with this 2-speaker wiring harness, designed for easy installation and seamless connection. Trust Master Spa Parts for dependable, high-quality components to keep your audio setup running smoothly.